null
  • Team Losi Desert Buggy XL Rear CV shields. Fits the original DBXL, new K&N trucks and the DBXL-E Electric tucks too.
  • Easiest way to do a nice clean install is to remove the A-arms from your truck as shown.
  • Hold the DBXL CV Shields in place over the A-arms and mark where you need to drill your holes.
  • Just drill the two holes in the A-arms as shown.
  • LOSI DESERT BUGGY XL & DBXL-E CV SHIELDS (2)
  • Attach the DBXL CV Shields with the provided screws.
  • Pop some FFRC Decals on there and you are good to go!
  • LOSI DESERT BUGGY XL & DBXL-E CV SHIELDS (2)
  • DBXL CV shields help protect your rear drive shaft, boot and bearings from the debris kicked up from the front wheels.

    • LOSI DESERT BUGGY XL & DBXL-E CV SHIELDS (2)

    Now: $8.00
    (7 reviews) Write a Review
    SKU:
    LDB012
    Availability:
    Usually ships in 24 hours!
    Width:
    3.00 (in)
    Height:
    7.00 (in)
    Depth:
    0.50 (in)
    Shipping:
    Calculated at Checkout
    Adding to cart… category.add_cart_announcement

    Product Description

    Team Losi Desert Buggy XL & DBXL-E Rear CV shields are in!  Custom designed for the perfect fit these little shields will help protect your CV boots and joint from debris. These little shields help to deflect the dirt and debris kicked up by your front wheels.  Designed to be a very simple install on the stock A-arms.  Kit includes two CV shields and screws.  You will need to pre-drill your holes with a 7/64 drill bit. 

    Also fits the DBXL K&N, Original DBXLE & the new DBXLE 2.0 trucks!

     

    ALL Fullforce RC Machined products are made in the USA!

     

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    7 Reviews Hide Reviews Show Reviews

    • 4
      on my DBXLE 2

      Posted by Unknown on 28th Jan 2022

      Fits my DBXLE 2. Love the thick plastic.

    • 2
      DBXL

      Posted by Ryan on 13th Apr 2021

      Looked awsome on the rig. First run they completely broke. Seemed very brittle and unable to provide any protection from debris as any debris immediately broke them. Reply by FFRC team: Hi Ryan, please contact us and we'll get you fixed up. Want to know how these failed and what we can do to improve them.

    • 5
      These shields are really NICE!

      Posted by Jake Tuckey on 20th May 2020

      These things look and function awesome! Love how the edges are gloss finished from laser cutter. Nice stuff. I put mine on with a set of titanium screws they were so cool!

    • 2
      DBXL CV shields are junk they broke the 1st time out

      Posted by Ron on 22nd Jun 2019

      Do not buy I want my money back Reply by FFRC Hi Ron. Think we got this taken care of. Your free replacements went out for you already. Just try and keep out of the rocks next time. lol

    • 2
      CV shields

      Posted by Michael Zimmerman on 24th Mar 2019

      Nice looking but unfortunately they do not hold up to pebbles and other debris. I was sent a second set but buy than the second one broke. Traced one out and made my own.

    • 2
      Cv Shields dbxle.

      Posted by Robert on 10th Aug 2018

      One side broke first time out. So Im rolling with one side good and one side half. Good thing I drilled into my a arms. Could have just been one of those things. They looked good though.

    • 2
      cheap thin laxan

      Posted by Chuck H. on 16th Oct 2017

      I installed them and they did not last 3 battery packs, complete waste of time and $11, Fullforce should be ashamed to put there name on these. Reply By Fullforce: Hi Chuck, Not sure how you were charged $11 for these. They retail for $8. We always back our product, if you feel there was a fault contact us and we would take care of it.