null
  • Team Losi DBLXE 2.0 ABS Rear CV Shields. Fits the new 2.0 trucks as well as the originals, both gas and electric versions.
  • DBXLE ABX CV shields help protect your rear drive shaft, boot and bearings from the debris kicked up from the front wheels. Installed here on the stock A-arm.
  • DBXLE ABX CV shields help protect your rear drive shaft, boot and bearings from the debris kicked up from the front wheels. Installed here on the stock A-arm.
  • DBXLE 2.0 ABS CV Shields packaged and ready to ship from our shop here in North Idaho.

    • LOSI DBXLE 2.0 ABS REAR CV SHIELDS (2)

    Now: $10.00
    (1 review) Write a Review
    SKU:
    LDBE12
    Availability:
    Usually ships in 24 hours!
    Width:
    3.00 (in)
    Height:
    7.00 (in)
    Depth:
    0.50 (in)
    Shipping:
    Calculated at Checkout
    Adding to cart… category.add_cart_announcement

    Product Description

    Team Losi DBXLE 2.0 Updated ABS CV Shields!  We took the original design for our DBXL shields and made them larger to protect more of the drive shaft and lower spring area.  Changed out to our ABS 0.075" Thick textured material as well vs the original clear PETG versions.  Had feedback from customers that the clear material was getting instantly blasted on the first runs so we knew we could do something better with these.  Custom designed for the perfect fit these little shields will help protect your CV boots and joint from debris. These little shields help to deflect the dirt and debris kicked up by your front wheels.  Designed to be a very simple install on the stock A-arms.  Kit includes two CV shields and screws.  You will need to remove the A-arms and pre-drill your holes with a 7/64 drill bit to install. 

    Also fits the DBXL K&N, Original DBXLE & the Original DBXLE  trucks!

     

    ALL Fullforce RC Machined products are made in the USA!

     

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    1 Review Hide Reviews Show Reviews

    • 5
      Perfect fit and protects the axle

      Posted by Art Brothe on 29th Aug 2022

      Fits the plastic arms perfectly. Wish there were stock holes on the arms to mount them too. Had to drill holes but it was not too difficult.